Maserati Greanturismo Upgrade Front Bumper Surrounding Guidance To 2020 Style
The Upgrade Parts :
1.Remove the wheel hub first
2. Then remove the fenders and the front section of the lining
3. Loosen the headlight screw and move the headlight back. Easy to install front bumper screws
4. Loosen the headlight screw and move the headlight back. Remove the two internal front bumper screws to hide them
5. Remove the cabin engine trim panel
5. Remove the cabin engine trim panel
6. Remove the upper front bumper screws
7. Remove the screws at the bottom of the front bumper and the screws on the lower fender
8. Remove the screws at the bottom of the front bumper and the screws on the lower fender
8. Remove the screws on the side of the front bumper
9.Unplug the electric eye wire speed plug
10. Unplug the water hose of the spray bottle and pay attention to the water
11. Completely remove the front bumper
11. Remove the air collecting cover behind the grille and the entire front bumper is removed.
If you have experience, it is very easy to remove the front bumper.
Now let’s start installing the small parts onto the new front bumper.
12. Remove the iron mesh and rubber strips of the air collecting hood and install them on the new air collecting hood.
13. Install new front bumper air net
14. Install the left and right air net bases, press them tightly and tighten them with screws.
15. Replace with the original car reinforced iron sheet
16. Remove the original front bumper foam
17. Remove the original car water spray pipe
17. Remove the headlight sprinkler, car radar, and radar wiring harness
18. Install new center grid
19. Install radar, headlight water spray kit
20. Install the front bumper foam. It should be noted that the original foam is slightly larger and the foam needs to be changed to a smaller size before installation.
The installation of small accessories is basically completed
20. Install front bumper lower lip
21. Install the new wind collecting hood
21. Install the new wind collecting hood
21. Reinstall the front bumper and headlights in order of removal
22. Install the two front bumper screws hidden inside the headlights
22. Install the two front bumper screws hidden inside the headlights
23. Modify the front bumper foam
24. Install lower guard plate screws
25. Finished Installatio
The fit is 100%, easy to install and replace directly without modification.
From the 07 model directly to the 2020 model